Newest parts from ISIS Performance

Newest additions to the ISIS Performance lineup!

-Angled T28 S14/S15 Oil Drain Tube

-OE Replacement Knock Sensor

-OE Replacement Ignition Coil Pack

ISIS Performance T28 S14/S15 Turbo Oil Drain Tube – Angled

       This is a great replacement for an S14/S15 motor with a missing or broken drain tube, as well as the perfect bolt-on option for anyone putting a larger sized T28 turbo (and variants such as the GT2560R/GT28R/GT28RS/GT2871R) on an S13. This will make the T28 series turbo oil drain bolt on to the S13 SR20DET with no modification required, making it the ideal drain tube for any S13 going T28.

http://www.240sxmotoring.com/isis-performance-t28-s14-s15-turbo-oil-drain-tube-angled/

ISIS OE Replacement Knock Sensor for Nissan S13, S14, S15, SR20DET, KA24DE and ISIS OE Replacement Ignition Coil Pack for Nissan S13/S14 SR20DET

     With the success of their other OE replacement parts ISIS has become determined to provide more and more high quality OE Replacement, hard to find JDM Parts. ISIS is now offering OE replacement knock sensors for the S13, S14, S15, SR20DET and KA24DE in addition to OE replacement ignition coil packs for the S13 and S14 SR20DET.

http://www.240sxmotoring.com/isis-oe-replacement-knock-sensor-nissan-240sx-sr20det-ka24de/

Introducing ... ENTHUSPEC

   We are proud to announce the launch of Enthuspec! As the name suggests, we have designed Enthuspec parts to meet the specification of the enthusiast - manufactured in the U.S.A. under the highest, most rigorous standards achievable, Enthuspec parts have received a D.O.T. certified status and are sure to satisfy even those of the most discerning taste.

We are the exclusive distributor of Enthuspec products and currently offer:

Enthuspec Clutch Line - 240sx 89-98 

• Enthuspec clutch lines are single lines made of stainless steel braided hose and coated for additional protection
• This line replaces only the OEM rubber flex line NOT the hard line.
• Green PVC Coated line with silver fittings
• Direct replacement for Nissan 240sx using a KA24 or SR20 (between hard line and slave cylinder)
• Gives driver a better clutch feel with more response and eliminates expansion of the line.

Enthuspec Power Steering Line - Nissan KA24DE and SR20DET

  -Enthuspec Stainless Steel Braded Power Steering Line for the Nissan 240sx fits all DOHC KA24DE and SR20DET applications. Using a -6an line that is braided and the lined with black hytrel to add additional protection, this line replaces your factoryHigh Pressure rubber line that tends to leak and crack over time. 

- Pressure tested up to 1100psi

- Replaces multi-piece OEM PS Line 

- will NOT fit HICAS Models

Enthuspec Z32/300ZX Front and Rear Brake Conversion Lines - Nissan 240sx S13/S14 89-98

- Enthuspec performance brake lines are custom designed to allow you to us the Nissan 300zx/Z32 Front callipers on othe Nissan 240sx front axle. The fittings are CNC machined and the lines are made of the finest PTFE hose and permanently crimped-on zinc plated steel fittings. Hose is made with an extruded PTFE core and a stainless steel wire braided cover. They reduce volumetric expansion giving you the reliability and safety you demand.

• Made in the USA
• D.O.T. certified
• Includes all components necessary for installation
• Comes in a vibrant racing green color

OEM style rubber brake hoses are notorious under braking pressure to flex. This causes for an inconsistent and less reliable braking response.

Enthuspec performance stainless steel braided brake lines fixes this issue and will provide for a firmer and more consistent feel when braking. These lines are made in the USA at the highest standards to achieve, a D.O.T. certified status.

This part comes with all necessary hardware required for a complete installation on your car.

Enthuspec performance stainless steel braided brake lines fit on all 1989-1998 Nissan 240sx chassis that are doing the Z32/300ZX front caliper conversion. 

WE ARE CURRENTLY OFFERING FREE SHIPPING ON ALL ENTHUSPEC PRODUCTS!

- To the spec of the enthusiast, we present ENTHUSPEC

240sxmotoring teams up with Driven Steering Wheels

We at 240sxmotoring.com are proud to announce the newest steering wheel on the market. Driven Steering wheels are built strong, durable and the price is very competitive.

Driven Steering Wheels are a new, Ultra-Lightweight aluminum designed high performance steering wheel for the racer that is looking for a classy, stylish and durable feel. This Deep Dish wheel measures 343mm Diameter and has a 89mm deep dish to eliminate the troubles of slapping any controls so you don't accidentally turn on your wipers mid turn!

Driven has embroidered their logo on the wheel for a clean look that is simple, yet effective. Wrapped in suede Driven Fully stitched the 3.5 Deep Dish wheel with a simple red color and has Laser-Engraved their logo on the spoke. At at reasonable cost, this Driven Deep Dish steering wheel is great for the track racer or weekend drift enthusiast.

These Driven Steering wheels can be purchased here at 240sxmotoring.com

Driven Deep Dish Steering Wheel - 343mm

The 12.9 is a flat faced 328mm steering wheel for the enthusiast who is looking for a wheel that will sit farther from the chest.

Driven has embroidered their logo on the wheel for a clean look. Wrapped in suede, Driven has fully stitched the 12.9 flat faced wheel with a simple red color and has Laser-Engraved their logo on the spoke. At at reasonable cost, this Driven Flat Face steering wheel is great for the track racer or weekend drift enthusiast.

Driven Flat Faced Black Suede Steering Wheel

New Tomei Turbo Elbow for SR20 is finally out for sale!

So after 6 months of waiting, Tomei finally releases the newest design to their turbo outlet for the SR20DET. What a piece of art! Casted for a bullet proof setup that should never leave a customer stranded with a crack. Very strong and very durable. Pricing is spot on! for $190 retail, you can't really ask for anything more. Comes with all the hardware needed for the install and most importantly, the adaptor for the different o2 sensor styles.
 

Product Description

· Diameter Size 76.3mm 
  · Larger air volume of 950cc 

Tomei Exhaust Turbo Elbow Outlet Pipe - Nissan SR20DET Engines

This unit will work with all SR20DET engines that have the Exhaust Air Injection (EAI) mechanism removed and most aftermarket exhaust manifolds. 

For years Tomei has been one of the most revered tuners and parts manufacturers in Japan. Their line of titanium exhausts are probably some of the most inexpensive and above par quality exhausts out there. They are also particularly well known for their great SR20DET Turbine Outlet Pipe. Countless people have chimed in about how great the turbo response improves after integrating one of these guys into their exhaust system.  Tomei probably doesn't believe in the philosophy of "if it isn't broken don't fix it" however, because they have gone and done just that.

The image above demonstrates the new design of this popular SR20DET part. It has an increased air flow capacity of 950cc, up from 750cc. The mouth of the outlet pipe is where some of this widening has occurred and should net better turbo response. The other end of the pipe has also been widened up to 3 inches which should mate perfectly with equivalent turbo downpipes. All these new features in an already great quality product ensures this unit will be a success again and with its lost wax casting process (also used in Fine Art Production), fitment, and installation should be a spot on.

* Comes with o2 sensor adapter to use skinny or fat SR20DET o2 sensor. 

Tomei Turbo Elbow Outlet for SR20DET 423002 Availabe here!

TiAL Q Blow Off Valve Now available @ 240sxmotoring

TiAL Q Blow Off Valve Now available @ 240sxmotoring

Available in 7psi - 11psi Springs Through countless hours of R&D we were able to make the same size valve flow a staggering 60% more than the original design - that means 60% more air is blown off per cycle! This is the highest flowing BOV on the market. For use on turbo-charged and super-charged applications (Paxton, Vortec, etc.). The body and all internal components are CNC-machined from 6061 aluminum alloy. It features a large 1.98 in (50.5mm) valve; we believe this is the largest valve available with the highest flow capacity. The V-Band design aluminum mounting clamp gives a very clean and unique appearance. The clamp is anodized and uses Stainless Steel hardware for a long lasting, corrosion-free appearance. The valve seal utilizes a Viton O-ring that is clamped in place to prevent the possibility of sticking to the seat and pulling out. The valve stem and guide are Teflon-lubricated, hard anodize-coated for wear resistance. The Blow Off Valve also comes with our own machined aluminum banjo-type air fitting and bolt, with over sized 10mm hose barb for quick actuator response. The actuator has a high temp silicone Nomex-reinforced diaphragm for long life. An aluminum or mild steel weld base mounting flange is furnished with each unit. Stainless Steel is available at an additional cost. The use of 6061 aluminum allows the housing to be anodized with a selection of colors where most cast aluminum allows can not be anodized. This allows the individual to match, or coordinate, the engine compartment color scheme. The clamp, valve, and housing will be offered in Silver, Titanium Gray, Red, Blue, and Purple to allow you to mix or match the clamp, body, and valve assembly to create a look unique to your application. You may also purchase a plain or unassembled unit to anodize or color-coat as you like.

2013 240sx Motoring Contingency Program Announced

For 2013, CIP Motorsports announces its 2013 contingency program for 240sx racers. Details can be found on this page as well as the application needed to be part of this program. 240SXMotoring Sponsorship We are thrilled to help out fellow racers like us for 2013. With a background in drifting, time attack and road racing, we feel we have a good grasp on knowledge and credentials for the motor sport of the Nissan 240sx. We feel our company has a lot to offer fellow racers as a parts retailer, fabrication shop, and on track consultant. We are eager to build racer relationships through out the country and hope that Nissan 240sx Racers will benefit from our proposed contingency program.

STICKERS!

We finally have stickers for customers! We are giving these stickers out with orders to show our appreciation.

Greddy 13921021 Oil Cap for Nissan - SILVER

We are finally selling and stocking the Greddy OIL caps for the Nissan motors



With an original GReddy design these CNC billet aluminum oil filler caps will bring class and style to your high performance engine. Available in either anodized blue or chrome finishes. Also included is a metal "Tuned by GReddy" badge. Applications for most Japanese vehicles.
Available here at 240sxmotoring.com!

Gates Engine Belts Now Available for SR20DET

OEM / Gates Nissan SR20DET V-belts for alternator, air conditioning and power steering

Gates Engine Belts for SR20DET SOLD HERE at 240sxmotoring.com!

K&N Oil Filters Now Available for SR20DET and KA24DE

K&N Oil Filters Now Available for SR20DET and KA24DE

Originally developed for demanding race applications, our premium Performance Gold Filter
K&N Oil Filters for the SR20DET and KA24DE Sold at 240sxmotoring.com!

AEM EMS Special Pricing on this Unit! S13 SR20DET

We have 1, yes only 1 of these on hand at this price. First S13 Blacktop or Redtop SR20DET.

Comes complete. Box opened to take picture.

AEM EMS S13 SR20DET

Fujii Spl Power Steering Lines for S-Chassis Now Available

240sxmotoring Now carries the full product line of Fujii-SPL Power Steering lines for the S-Chassis. With your choice of KA, SR, RB, or LS1 Motors and the use of rubber or stainless steel braided lines.

Fujii-SPL Power Steering Lines Sold at 240sxmotoring HERE!

Synapse Engineering now available at 240sxmotoring.com

Innovation is the product of our most basic drive, problem solving. Innovation then becomes the foundation for the next evolution

In 1999 we designed the Missing Link product line to fix some of the unaddressed reliability problems that plagued aftermarket turbocharged Honda and Acura owners. Six years later the underlying concept still stands and the Missing Link is, today, an industry standard. Synchronic is a fundamental redesign of the geometry of the ubiquitous pneumatic/hydraulic actuator. This approach is one that we endeavor to commercialize for applications in Automotive, Aerospace, Medical devices, Manufacturing etc. It is this horizontal platform technology that you will find in our new line of Synchonic fuel pressure regulators. It is this approach that has allowed us to miniaturize the legacy FMU to 1/5th it original size. Synchronic will also be the core for products we will be launching that will challenge the legacy approach to the pneumatic boost controller, blow off valve and wastegate. Our mission is to innovate and deliver products that go beyond repackaging the status quo, but instead, redefine the performance landscape.

Synapse Engineering BOV and Wastegates available Here

25 Days Til CHRISTMAS Count-Down

Every day until christmas, we are offering ONE product on special for wholesale pricing. Check this page daily for the new product of the day special.

25days of christmas SPECIALS

BLACK FRIDAY SPECIAL at 240sxmotoring.com

BLACK FRIDAY SPECIAL - The 2009 Black Friday Special Presented by 240SXMOTORING.com Super Low Prices and Savings! Limited STOCK! Free Shipping on orders over $350

240SX MOTORING in DSPORT MAG from Englishtown, NJ

Taking first place in Unlimited RWD Class!

Ended up landing 2nd place Overall for the Season!

New Product Release: Blitz Type-SE FMIC : S13/S14 SR20DET

Another new release from Blitz, Type-SE FMIC kit for S13/S14 SR20DET's. Core measures 24.0 X 12.0 X2.75", with end tanks will run across 32" wide. This intercooler kit comes with all the necessary all aluminum pipings and hardwares for install minus the hotpipe (as usual with most JDM kits).

For the price this is the most affordable high quality JDM branded FMIC available in the market today for the SR20's, good for up to 450hp.

The New BLITZ SE Intercooler Kit Available HERE at 240sxmotoring.com

GReddy PE II Catback for Nissan 240sx 89-94 S13

GReddy PE II Catback for Nissan 240sx 89-94 S13

At 240sxmotoring, we got our hands on another rare JDM exhaust system not regularly offered stateside. The Greddy/Trust PE II is a full stainless exhaust system for the Nissan 240sx that fits like a glove.

Exhaust systems have always been the base for aftermarket performance. From the beginner starting off to the high horsepower racer, who need to comply to track sound requirements, a well engineered exhaust system will enhance performance, sound, appearances, and economy.

Upgrading restrictive factory exhaust with a tuned GReddy Exhaust System will increase horsepower & torque, add a deep sporty exhaust note, give style & flare to the look of your car, all while increasing fuel efficiency. From the very start, our unique straight-through design has been the key to unleashing power with a deep sporty tone.

Engineered by experienced exhaust technicians, each application is fine-tuned inside and out. Careful attention to piping, muffler and tip positions on the undercarriage and rear bumper, and taking into consideration moving suspension parts and ground clearance are all part of our standard design.

Greddy/Trust PEII S13 Catback System Available at 240sxmotoring.com! HERE

Trust TiR Exhaust for Nissan 240sx S14 95-98 (FULL TITANIUM)

We were able to get our hands on 2, yes only 2, rare "baller" Trust TiR exhaust systems for the Nissan 240sx S14. Trust TiR Exhaust for Nissan 240sx S14 95-98 (FULL TITANIUM) 80mm, 3" piping. Total weight of exhaust is less than 15lbs!!!

This is the lightest and cheapest Full Titanium exhaust on the market. VERY VERY Rare and hard to find in the states.

Trust TiR Exhaust for Nissan 240sx S14 95-98 (FULL TITANIUM) available at 240sxmotoring.com

Free GROUND shipping for the month of November at 240sxmotoring.com!

We are offering FREE GROUND SHIPPING on orders over $350
Some Exclusions Apply:
-Order Must Be Equal To or OVER $350 in product
-Body Kits, Hoods, Fenders, Body Panels, Spoilers and Wheels are NOT included in this offer
-Customer must be located in USA, except HI and AK
-Only valid for Fedex GROUND or UPS GROUND Shipping